Übersicht Übersicht Ebene Ebene
Software für OS/2 und eCS
Download details

cdrecord cdrecord

Installation
------------

You need the ASPI-router:

ftp://ftp.leo.org/pub/comp/os/os2/leo/drivers/misc/aspir101.zip
http://hobbes.nmsu.edu

or an improved one (c) Paul Ratcliffe:

http://home.clara.net/orac/os2.htm

For your convenience I included this driver (beta 6) in the
distribution. Note that this driver IS NOT RELEASED UNDER THE
TERMS OF THE GPL!
The driver may be found in the subdirectory 'aspirout'.

and the EMX runtime libraries 0.9d fix 4:

ftp://ftp.leo.org/pub/comp/os/os2/leo/gnu/emx+gcc/emxrt.zip
http://hobbes.nmsu.edu

If you use an ATAPI writer you need also DaniAtapi.flt
and Danis506.add. Get both from Hobbes:

http://hobbes.nmsu.edu/pub/os2/system/drivers/storage/


1a. Unzip the Aspi-Router distribution in a directory of your choice. Add the following lines to your
config.sys file.

BASEDEV=OS2ASPI.DMD /ALL

A similar line may be already present in your config.sys depending on the software you've got installed.

DEVICE=x:os2bootaspirout.sys

Change the path to aspirout.sys as necessary.

Note: The switch /ALL must be present or CDRecord/2 will not work!

1b. If you have an Atapi Cd-writer add - after unzipping the files to x:OS2BOOT -
to your config.sys

BASEDEV=DANIS506.ADD

BASEDEV=DANIATAPI.FLT

BASEDEV=OS2ASPI.DMD /ALL

A similar line may already be present in your config.sys depending on the software you've got installed.

DEVICE=x:OS2BOOTASPIROUT.SYS

Change the path to aspirout.sys as necessary.

Note: The switch /ALL must be present or CDRecord/2 will not work!

Note: Adding switches to DANIS506.ADD is normally NOT necessary. In contrary
it can cause several faults.

REM or delete from your config.sys:

BASEDEV=IBM1S506.ADD

BASEDEV=IBMATAPI.FLT

BASEDEV=IBMIDECD.FLT

If one of these drivers is in your config.sys CD-Record refuses to work.

1.c: If you have an Mix of SCSI and Atapi (e.g. Scsi CD-Player, Atapi CD-Recorder)
use the Atapi settings.

2: Put the EMX runtime libraries into your LIBPATH following the instructions
contained in the distribution.

3: Reboot. Thats necessary because OS/2 has to load changed or added drivers.

Version  2.00     
Dateigröße  1.46 MB     
    Erstelldatum  01.05.2015 16:02:29 
Versionsdatum  17.01.2003 01:00:00     
Installertyp  Sonstiges Setup  Pakettyp  ZIP 
Lizenz  GNU/GPL external     
    MD5 Prüfsumme  2786c5bfb0aa5824320ad1236cce76ba 
    SHA1 Prüfsumme  6b80846254f2c43912d721e1cba986ef31fb3c0e 
Dateiname: cdrec...os2.zip
Dateigröße: 1.46 MB
Download Download melden

Installation
------------

You need the EMX runtime libraries 0.9d fix 4. Install them according
the instructions given in the package.

ftp://ftp.leo.org/pub/comp/os/os2/leo/gnu/emx+gcc/emxrt.zip
http://hobbes.nmsu.edu

The command EMXREV.EXE should give you the following:

EMX : revision = 61
EMXIO : revision = 60
EMXLIBC : revision = 63
EMXLIBCM : revision = 64
EMXLIBCS : revision = 64
EMXWRAP : revision = 60


For installation start 'install.exe'. If you prefer installation
by hand refer to the file cdr-2_0 eadme.1st for instructions.

Zum Seitenanfang